No, the mechanical keyboards have lots of tiny electronic components. Please keep the keyboard away from liquid.
Yes. Before that, please make sure that your phone USB cable is Micro USB and ensure the quality of it.
No, you can't use the Bluetooth when the keyboard is connected by USB cable, obviously that the Bluetooth key doesn't flash at all.
Well, it lacks the physical keys of F1, F2, F3 etc. But you can press FN+1, FN+2 to get these keys.
The keycaps are manufactured in standard specifications, and can support the replacement of most DIY keycaps. The switch is not pluggable.
At present, this keyboard doesn't support to display details of battery status. When the battery runs out, the space bar will turn to red and begin to flash slowly.
(In addition, when you connect the keyboard with your computer through USB cable, the keyboard will be charging automatically, and its space bar will turn to green and begin to flash slowly; If the space bar has no flash in the USB connection mode, that means the keyboard has full charge.
a. Press down FN + Q or W or E (three profiles for three devices) for 3-5 seconds. When the indicator starts blinking rapidly, it means the keyboard is in pairing mode.
b. Find the keyboard on your computer, and connect it.
c. Follow the instruction, and enter the number that appeared on your computer.
d. If you want to change the profile, simply delete the keyboard on the computer.
e. You could find more details in this manual.
There are seven colors currently. You can custom the light color of each key. When the keyboard driver is released, you could customize every key's light with up to 16.8 million colors.
Dust cleaning under keycaps
Tools: Keycaps remover( included in the package), q-tips or any thin stick with rag tied.
Remove keycaps first, then use the q-tips to gently brush the gap between keys until no obvious litter left. Use clean water to wash keycaps.
Cleaning sticky switches
Tools: Soda water, Straw
Suck in some water, press into switch, then press key repeatedly. Wait till tomorrow.
Liquid spilling reparation
Unplug the USB connector immediately! Turn your keyboard vertically for liquid to drop down, then you should use dry rag to wipe off the remain liquid. Wait until you make sure the keyboard is totally dry.
Yes. You should confirm the Bluetooth 4.0 adapter quality before doing that.
These are hotkeys that users need to know:
FN + `(~) = Lock All Keys
FN + 7(&) = 30ms debounce delay ( key response time )
FN + 8(*) = 40ms ( key response time )
FN + 9(() = 50ms ( key response time )
FN + 0()) = 6KRO
FN + -(_) = 24KRO
FN + F12 = Lock Windows Key
FN + PS = Number Lock
Black - Gamer's Favorite
Solid feel and instant feedback, actuation force: 65g
Blue - Typist's Spa
Tactile bump and audible click, actuation force: 60g
Brown - Middle Option
Softer and less clicky, actuation force: 55g
Red - Excellent for gaming and typing
Ridiculously smooth and accurate, actuation force: 50g
The range is 10 meters theoretically. It may be limited based on complicated situations.
You can press FN+F12 (Gramr or Excalibur) and press FN+Windows key (Calibur and Tyrfing) to lock or unlock windows key.
At first, you could try to use it in another computer to confirm that if the keyboard is defective; and then you could check out the driver, for example a new installed driver may cause the problem. If this can not help you to solve the problem, don't hesitate to contact us, offer us more details of the problem, and we will help to solve the problem.
We suggest that you could turn off the keyboard before the power off of pc, in order to avoid losing connection with pc.
For Tyrfing, it is to show the Caps Lock key is triggered;
For Gramr and Excalibur, the F12 (Lock windows), PrintScreen (NumLk), Pause (ScrLk).
Because these keys also represent some keys Capslock, WindowsLock, NumLk and ScrLk. When they're not lighted=active, lighted=inactive.
Yes, if your laptop has a SATA interface. We recommend you to connect it to SATA3 port. It is also backward compatible with SATA1/2, but the R/W speed will be limited.
We will provide firmware support when users have met any kind of problems. We don't have regular firmware updates for now.
Yes. It will breath with blue lighting when it is working.
Detach the old HDD, then place your DREVO SSD into the bracket and use the same screws you removed to secure it. Then slide DREVO SSD back into the bay and plug it in the SATA connector used by the old drive.
The 3 independent capacitors are designed to secure data when lose power.
The form factor is Non-Volatile Memory Express (NVMe) HHHL.
The controller is SM2260 and NAND type is 3D MLC.
The Zeus has equipped with high-end DRAM which will provide higher random read and write speeds.
The Ares has three working modes - S - Slow(slowest speeds with less power consumption); D - Standard(middle option) and P - Powerful.
You need firstly enter BIOS and change the mode of HDD from SATA to AHCI.
You should firstly enter BIOS to choose the SSD as the first boot disk.
The speed value may vary from different devices and different test circumstances.
Yes. Please connect it to a SATA3 port. It is also backward compatible with SATA1/2, but the R/W speed will be limited.