Choose Product

FAQs


These are hotkeys that users need to know:

FN + `(~) = Lock All Keys

FN + 7(&) = 30ms debounce delay ( key response time )

FN + 8(*) = 40ms ( key response time )

FN + 9(() = 50ms ( key response time )

FN + 0()) = 6KRO

FN + -(_) = 24KRO

FN + F12 = Lock Windows Key

FN + PS = Number Lock

 


Dust cleaning under keycaps
Tools: Keycaps remover( included in the package), q-tips or any thin stick with rag tied.
Remove keycaps first, then use the q-tips to gently brush the gap between keys until no obvious litter left. Use clean water to wash keycaps.

Cleaning sticky switches
Tools: Soda water, Straw
Suck in some water, press into switch, then press key repeatedly. Wait till tomorrow.

Liquid spilling reparation
Unplug the USB connector immediately! Turn your keyboard vertically for liquid to drop down, then you should use dry rag to wipe off the remain liquid. Wait until you make sure the keyboard is totally dry.

 


Black - Gamer’s Favorite

Solid feel and instant feedback, actuation force: 65g

Blue - Typist’s Spa

Tactile bump and audible click, actuation force: 60g

Brown - Middle Option

Softer and less clicky, actuation force: 55g

Red - Excellent for gaming and typing

Ridiculously smooth and accurate, actuation force: 50g

 

FAQs


a.Press down FN + Q or W or E (three profiles for three devices) for 3-5 seconds. When the indicator starts blinking rapidly, it means the keyboard is in pairing mode.

b.Find the keyboard on your computer, and connect it.

c.Follow the instruction, and enter the number that appeared on your computer.

d.If you want to change the profile, simply delete the keyboard on the computer.

 


Dust cleaning under keycaps
Tools: Keycaps remover( included in the package), q-tips or any thin stick with rag tied.
Remove keycaps first, then use the q-tips to gently brush the gap between keys until no obvious litter left. Use clean water to wash keycaps.

Cleaning sticky switches
Tools: Soda water, Straw
Suck in some water, press into switch, then press key repeatedly. Wait till tomorrow.

Liquid spilling reparation
Unplug the USB connector immediately! Turn your keyboard vertically for liquid to drop down, then you should use dry rag to wipe off the remain liquid. Wait until you make sure the keyboard is totally dry.

 


Black - Gamer’s Favorite

Solid feel and instant feedback, actuation force: 65g

Blue - Typist’s Spa

Tactile bump and audible click, actuation force: 60g

 

FAQs


Hard drive manufacturers market drives in terms of decimal (base 10) capacity. In decimal notation, one megabyte (MB) is equal to 1,000,000 bytes, one gigabyte (GB) is equal to 1,000,000,000 bytes, and one terabyte (TB) is equal to 1,000,000,000,000 bytes.

Programs such as FDISK, system BIOS, Windows, and MacOS use the binary (base 2) numbering system. In the binary numbering system, one megabyte is equal to 1,048,576 bytes, one gigabyte is equal to 1,073,741,824 bytes, and one terabyte is equal to 1,099,511,627,776 bytes.

So
60,000,000,000 / 1,048,576 = 57,220 megabytes (MB) = 55.8 gigabytes (GB)
120,000,000,000 / 1,048,576 = 114,440 megabytes (MB) = 111.7 gigabytes (GB)
240,000,000,000 / 1,048,576 = 228,881 megabytes (MB) = 223.5 gigabytes (GB)
480,000,000,000 / 1,048,576 = 457,763 megabytes (MB) = 447 gigabytes (GB)

 


Any motherboard or laptop with SATA port is compatible with Drevo X1.

 


SATA I (revision 1.x) interface, formally known as SATA 1.5Gb/s, is the first generation SATA interface running at 1.5 Gb/s. The bandwidth throughput, which is supported by the interface, is up to 150MB/s.

SATA II (revision 2.x) interface, formally known as SATA 3Gb/s, is a second generation SATA interface running at 3.0 Gb/s. The bandwidth throughput, which is supported by the interface, is up to 300MB/s.

SATA III (revision 3.x) interface, formally known as SATA 6Gb/s, is a third generation SATA interface running at 6.0Gb/s. The bandwidth throughput, which is supported by the interface, is up to 600MB/s. This interface is backwards compatible with SATA 3 Gb/s interface.

SATA II specifications provide backward compatibility to function on SATA I ports. SATA III specifications provide backward compatibility to function on SATA I and SATA II ports. However, the maximum speed of the drive will be slower due to the lower speed limitations of the port.

 


First, you need to enter the BIOS, then go to the SATA Config and Enable AHCI. Click Save/Apply and you'll be able to find your drive in the Disk Managment, format the drive and it starts to work.

 

Contact
Business Cooperation :
Technical Support :
Follow us: